Material Properties
Technical specifications for hot-rolled non-alloy structural steel products
Category: Structural steel
Document reference: EN 10025-2:2019
Document title: Hot rolled products of structural steels - Part 2: Technical delivery conditions for non-alloy structural steels
Specifies the mechanical properties for hot-rolled, non-alloy structural carbon steels used in general construction. The standard defines guaranteed minimum yield and tensile strengths, impact toughness limits, and weldability requirements based on thickness.
The table below gives the guaranteed minimum yield strength ReH and tensile strength Rm values across product thickness intervals. Covers S235, S275, S355, S460, and S500 steel grades.
Mechanical properties of hot-rolled non-alloy structural steels
Steel Grade | t ≤ 3 mm | 3 < t ≤ 16 mm | 16 < t ≤ 40 mm | 40 < t ≤ 63 mm | 63 < t ≤ 80 mm | 80 < t ≤ 100 mm | 100 < t ≤ 150 mm | 150 < t ≤ 200 mm | 200 < t ≤ 250 mm | 250 < t ≤ 400 mm | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
fy (MPa) | fu (MPa) | fy (MPa) | fu (MPa) | fy (MPa) | fu (MPa) | fy (MPa) | fu (MPa) | fy (MPa) | fu (MPa) | fy (MPa) | fu (MPa) | fy (MPa) | fu (MPa) | fy (MPa) | fu (MPa) | fy (MPa) | fu (MPa) | fy (MPa) | fu (MPa) | |
| S235JR | 235 | 360 | 235 | 360 | 225 | 360 | 215 | 360 | 215 | 360 | 215 | 360 | 195 | 350 | 185 | 340 | 175 | 340 | 165 | 330 |
| S235J0 | 235 | 360 | 235 | 360 | 225 | 360 | 215 | 360 | 215 | 360 | 215 | 360 | 195 | 350 | 185 | 340 | 175 | 340 | 165 | 330 |
| S235J2 | 235 | 360 | 235 | 360 | 225 | 360 | 215 | 360 | 215 | 360 | 215 | 360 | 195 | 350 | 185 | 340 | 175 | 340 | 165 | 330 |
| S275JR | 275 | 430 | 275 | 410 | 265 | 410 | 255 | 410 | 245 | 410 | 235 | 410 | 225 | 400 | 215 | 380 | 205 | 380 | 195 | 380 |
| S275J0 | 275 | 430 | 275 | 410 | 265 | 410 | 255 | 410 | 245 | 410 | 235 | 410 | 225 | 400 | 215 | 380 | 205 | 380 | 195 | 380 |
| S275J2 | 275 | 430 | 275 | 410 | 265 | 410 | 255 | 410 | 245 | 410 | 235 | 410 | 225 | 400 | 215 | 380 | 205 | 380 | 195 | 380 |
| S355JR | 355 | 510 | 355 | 470 | 345 | 470 | 335 | 470 | 325 | 470 | 315 | 470 | 295 | 450 | 285 | 450 | 275 | 450 | 265 | 450 |
| S355J0 | 355 | 510 | 355 | 470 | 345 | 470 | 335 | 470 | 325 | 470 | 315 | 470 | 295 | 450 | 285 | 450 | 275 | 450 | 265 | 450 |
| S355J2 | 355 | 510 | 355 | 470 | 345 | 470 | 335 | 470 | 325 | 470 | 315 | 470 | 295 | 450 | 285 | 450 | 275 | 450 | 265 | 450 |
| S355K2 | 355 | 510 | 355 | 470 | 345 | 470 | 335 | 470 | 325 | 470 | 315 | 470 | 295 | 450 | 285 | 450 | 275 | 450 | 265 | 450 |
| S460JR | - | - | 460 | 550 | 440 | 550 | 420 | 550 | 400 | 550 | 390 | 550 | 390 | 530 | - | - | - | - | - | - |
| S460J0 | - | - | 460 | 550 | 440 | 550 | 420 | 550 | 400 | 550 | 390 | 550 | 390 | 530 | - | - | - | - | - | - |
| S460J2 | - | - | 460 | 550 | 440 | 550 | 420 | 550 | 400 | 550 | 390 | 550 | 390 | 530 | - | - | - | - | - | - |
| S460K2 | - | - | 460 | 550 | 440 | 550 | 420 | 550 | 400 | 550 | 390 | 550 | 390 | 530 | - | - | - | - | - | - |
| S500J0 | - | - | 500 | 580 | 480 | 580 | 460 | 580 | 450 | 580 | 450 | 580 | 450 | 560 | - | - | - | - | - | - |
Note: The properties presented on this page are based on standard specifications, which should be consulted for compliance. The information presented here is for reference purposes only.