W 360x410x744
Production class: hot rolled (ASTM A 6/A 6M)
Section geometry
Section properties
Verify W 360x410x744 in Eurocode 3 calculators
Pre-load this cross-section directly into a structural analysis or individual capacity check.
Simple supported beam with permanent & variable load
Configure span length and manual point (F at midspan) or distributed (q from 0 to L) loads.
Quick capacity verifications
Buckling capacity check
Flexural, torsional & torsional-flexural buckling (EN 1993-1-1)
Moment capacity check
Uniaxial & biaxial bending moment resistance (EN 1993-1-1)
Shear capacity check
Plastic & elastic shear force verification (EN 1993-1-1)
Axial capacity check
Tension & compression cross-section resistance (EN 1993-1-1)
Profile overview for W 360x410x744
The W 360x410x744 is a structural steel cross-section utilized in commercial construction, industrial framing, and mechanical engineering. Manufactured as a hot rolled section, it complies with ASTM A 6/A 6M dimensional standards, ensuring predictability in detailing and fabrication.Access to its exact geometric and statical properties is essential for 3D modeling and structural verification.
Geometry: This open profile features a total depth (h) of 498 mm and a flange width (b) of 432 mm, supported by a 55.6 mm thick web and 88.9 mm thick flanges. With a cross-sectional area of 94800 mm² and a linear mass of 744 kg/m, the W 360x410x744 offers a distinct stiffness-to-weight ratio for both column (axial) and beam applications.
Section properties: For design of bending, the major and minor axis properties dictate the member's structural capacity. The strong-axis moment of inertia (Iy) of 3424700000 mm⁴ governs major deflection and serviceability limits. To calculate the ultimate bending resistance, engineers may utilize the strong-axis plastic section modulus of 17180000 mm³. For lateral stability and column buckling verifications, the weak-axis moment of inertia (Iz) provides 1199400000 mm⁴ of lateral stiffness.
Advanced analysis: For complex load cases, the W 360x410x744 provides a y-axis shear area (at strong bending axis) of 76809.6 mm² for web shear verification and a torsion constant of 216600000 mm⁴ for calculating rotational twist under eccentric loading. Additionally, a warping constant of 49980000000000 mm⁶ is available for rigorous lateral-torsional buckling (LTB) checks.
Stay ahead of Eurocode 3 & structural design updates
Get practical Eurocode verification guides, new calculator releases (like automated W 360x410x744 checks), and National Annex insights delivered once a month. Zero spam.