IPEO 180

The IPEO 180 is a structural steel cross-section utilized in commercial construction, industrial framing, and mechanical engineering. Manufactured as a hot rolled section, it complies with EN 10365 dimensional standards, ensuring predictability in detailing and fabrication.Access to its exact geometric and statical properties is essential for 3D modeling and structural verification.

Geometry: This open profile features a total depth (h) of 182 mm and a flange width (b) of 92 mm, supported by a 6 mm thick web and 9 mm thick flanges. With a cross-sectional area of 2710 mm² and a linear mass of 21.3 kg/m, the IPEO 180 offers a distinct stiffness-to-weight ratio for both column (axial) and beam applications.

Section properties: For design of bending, the major and minor axis properties dictate the member's structural capacity. The strong-axis moment of inertia (I_y) of 15050000 mm⁴ governs major deflection and serviceability limits. To calculate the ultimate bending resistance, engineers may utilize the strong-axis plastic section modulus of 189100 mm³. For lateral stability and column buckling verifications, the weak-axis moment of inertia (I_z) provides 1172000 mm⁴ of lateral stiffness.

Advanced analysis: For complex load cases, the IPEO 180 provides a y-axis shear area (at strong bending axis) of 1656 mm² for web shear verification and a torsion constant of 66470 mm⁴ for calculating rotational twist under eccentric loading. Additionally, a warping constant of 8739000000 mm⁶ is available for rigorous lateral-torsional buckling (LTB) checks.