IPEAA 180

Production class: hot rolled (EN 10365)

Section geometry

IPEAA shape
Height (h):
176.4mm
Width (b):
91mm
Web thickness (tw):
4.3mm
Flange thickness (tf):
6.2mm
Radius (r):
9mm

Section properties

Moment of inertia (I):mm⁴
Y-axis:
1.020E7
Z-axis:
7.811E5
Elastic section modulus (Wel):mm³
Y-axis:
1.156E5
Z-axis:
17160
Plastic section modulus (Wpl):mm³
Y-axis:
1.305E5
Z-axis:
26710
Radius of gyration (i):mm
Y-axis:
73
Z-axis:
20
Plastic shear area (Av):mm²
Y-axis:
1128
Z-axis:
912.9

Weight per meter:
14.9kg/m
Area (A):
1900mm²
Surface area per meter:
0.693m²/m
Torsion constant (It):
24310mm⁴
Warping constant (Iw):
5.639E9mm⁶

Verify IPEAA 180 in Eurocode 3 calculators

Pre-load this cross-section directly into a structural analysis or individual capacity check.

Member design & optimization

Simple supported beam with permanent & variable load

Configure span length and manual point (F at midspan) or distributed (q from 0 to L) loads.

mm
kN/m
kN/m

Profile overview for IPEAA 180

The IPEAA 180 is a structural steel cross-section utilized in commercial construction, industrial framing, and mechanical engineering. Manufactured as a hot rolled section, it complies with EN 10365 dimensional standards, ensuring predictability in detailing and fabrication.Access to its exact geometric and statical properties is essential for 3D modeling and structural verification.

Geometry: This open profile features a total depth (h) of 176.4 mm and a flange width (b) of 91 mm, supported by a 4.3 mm thick web and 6.2 mm thick flanges. With a cross-sectional area of 1900 mm² and a linear mass of 14.9 kg/m, the IPEAA 180 offers a distinct stiffness-to-weight ratio for both column (axial) and beam applications.

Section properties: For design of bending, the major and minor axis properties dictate the member's structural capacity. The strong-axis moment of inertia (Iy) of 10200000 mm⁴ governs major deflection and serviceability limits. To calculate the ultimate bending resistance, engineers may utilize the strong-axis plastic section modulus of 130500 mm³. For lateral stability and column buckling verifications, the weak-axis moment of inertia (Iz) provides 781100 mm⁴ of lateral stiffness.

Advanced analysis: For complex load cases, the IPEAA 180 provides a y-axis shear area (at strong bending axis) of 1128.4 mm² for web shear verification and a torsion constant of 24310 mm⁴ for calculating rotational twist under eccentric loading. Additionally, a warping constant of 5639000000 mm⁶ is available for rigorous lateral-torsional buckling (LTB) checks.

Monthly Eurocode engineering digest

Stay ahead of Eurocode 3 & structural design updates

Get practical Eurocode verification guides, new calculator releases (like automated IPEAA 180 checks), and National Annex insights delivered once a month. Zero spam.

1 email per month. Unsubscribe in 1 click at any time.