IPEA 500

The IPEA 500 is a structural steel cross-section utilized in commercial construction, industrial framing, and mechanical engineering. Manufactured as a hot rolled section, it complies with EN 10365 dimensional standards, ensuring predictability in detailing and fabrication.Access to its exact geometric and statical properties is essential for 3D modeling and structural verification.

Geometry: This open profile features a total depth (h) of 497 mm and a flange width (b) of 200 mm, supported by a 8.4 mm thick web and 14.5 mm thick flanges. With a cross-sectional area of 10110 mm² and a linear mass of 79.4 kg/m, the IPEA 500 offers a distinct stiffness-to-weight ratio for both column (axial) and beam applications.

Section properties: For design of bending, the major and minor axis properties dictate the member's structural capacity. The strong-axis moment of inertia (I_y) of 429300000 mm⁴ governs major deflection and serviceability limits. To calculate the ultimate bending resistance, engineers may utilize the strong-axis plastic section modulus of 1946000 mm³. For lateral stability and column buckling verifications, the weak-axis moment of inertia (I_z) provides 19390000 mm⁴ of lateral stiffness.

Advanced analysis: For complex load cases, the IPEA 500 provides a y-axis shear area (at strong bending axis) of 5800 mm² for web shear verification and a torsion constant of 642800 mm⁴ for calculating rotational twist under eccentric loading. Additionally, a warping constant of 1125000000000 mm⁶ is available for rigorous lateral-torsional buckling (LTB) checks.