HL 920x537
Production class: hot rolled (EN 10365)
Section geometry
Section properties
Verify HL 920x537 in Eurocode 3 calculators
Pre-load this cross-section directly into a structural analysis or individual capacity check.
Simple supported beam with permanent & variable load
Configure span length and manual point (F at midspan) or distributed (q from 0 to L) loads.
Quick capacity verifications
Buckling capacity check
Flexural, torsional & torsional-flexural buckling (EN 1993-1-1)
Moment capacity check
Uniaxial & biaxial bending moment resistance (EN 1993-1-1)
Shear capacity check
Plastic & elastic shear force verification (EN 1993-1-1)
Axial capacity check
Tension & compression cross-section resistance (EN 1993-1-1)
Profile overview for HL 920x537
The HL 920x537 is a structural steel cross-section utilized in commercial construction, industrial framing, and mechanical engineering. Manufactured as a hot rolled section, it complies with EN 10365 dimensional standards, ensuring predictability in detailing and fabrication.Access to its exact geometric and statical properties is essential for 3D modeling and structural verification.
Geometry: This open profile features a total depth (h) of 965 mm and a flange width (b) of 425 mm, supported by a 28.4 mm thick web and 51.1 mm thick flanges. With a cross-sectional area of 68250 mm² and a linear mass of 537 kg/m, the HL 920x537 offers a distinct stiffness-to-weight ratio for both column (axial) and beam applications.
Section properties: For design of bending, the major and minor axis properties dictate the member's structural capacity. The strong-axis moment of inertia (Iy) of 10696100000 mm⁴ governs major deflection and serviceability limits. To calculate the ultimate bending resistance, engineers may utilize the strong-axis plastic section modulus of 25360000 mm³. For lateral stability and column buckling verifications, the weak-axis moment of inertia (Iz) provides 655600000 mm⁴ of lateral stiffness.
Advanced analysis: For complex load cases, the HL 920x537 provides a y-axis shear area (at strong bending axis) of 43435 mm² for web shear verification and a torsion constant of 45420000 mm⁴ for calculating rotational twist under eccentric loading. Additionally, a warping constant of 136510000000000 mm⁶ is available for rigorous lateral-torsional buckling (LTB) checks.
Stay ahead of Eurocode 3 & structural design updates
Get practical Eurocode verification guides, new calculator releases (like automated HL 920x537 checks), and National Annex insights delivered once a month. Zero spam.