HL 1100A

The HL 1100A is a structural steel cross-section utilized in commercial construction, industrial framing, and mechanical engineering. Manufactured as a hot rolled section, it complies with EN 10365 dimensional standards, ensuring predictability in detailing and fabrication.Access to its exact geometric and statical properties is essential for 3D modeling and structural verification.

Geometry: This open profile features a total depth (h) of 1090 mm and a flange width (b) of 400 mm, supported by a 18 mm thick web and 31 mm thick flanges. With a cross-sectional area of 43650 mm² and a linear mass of 343 kg/m, the HL 1100A offers a distinct stiffness-to-weight ratio for both column (axial) and beam applications.

Section properties: For design of bending, the major and minor axis properties dictate the member's structural capacity. The strong-axis moment of inertia (I_y) of 8783500000 mm⁴ governs major deflection and serviceability limits. To calculate the ultimate bending resistance, engineers may utilize the strong-axis plastic section modulus of 18270000 mm³. For lateral stability and column buckling verifications, the weak-axis moment of inertia (I_z) provides 331300000 mm⁴ of lateral stiffness.

Advanced analysis: For complex load cases, the HL 1100A provides a y-axis shear area (at strong bending axis) of 24800 mm² for web shear verification and a torsion constant of 11040000 mm⁴ for calculating rotational twist under eccentric loading. Additionally, a warping constant of 92700000000000 mm⁶ is available for rigorous lateral-torsional buckling (LTB) checks.