HEA 200

Production class: hot rolled (EN 10365)

Section geometry

HEA shape
Height (h):
190mm
Width (b):
200mm
Web thickness (tw):
6.5mm
Flange thickness (tf):
10mm
Radius (r):
18mm

Section properties

Moment of inertia (I):mm⁴
Y-axis:
3.692E7
Z-axis:
1.335E7
Elastic section modulus (Wel):mm³
Y-axis:
3.886E5
Z-axis:
1.335E5
Plastic section modulus (Wpl):mm³
Y-axis:
4.294E5
Z-axis:
2.038E5
Radius of gyration (i):mm
Y-axis:
82
Z-axis:
49
Plastic shear area (Av):mm²
Y-axis:
4000
Z-axis:
1808

Weight per meter:
42.3kg/m
Area (A):
5380mm²
Surface area per meter:
1.136m²/m
Torsion constant (It):
2.104E5mm⁴
Warping constant (Iw):
1.080E11mm⁶

Verify HEA 200 in Eurocode 3 calculators

Pre-load this cross-section directly into a structural analysis or individual capacity check.

Member design & optimization

Simple supported beam with permanent & variable load

Configure span length and manual point (F at midspan) or distributed (q from 0 to L) loads.

mm
kN/m
kN/m

Profile overview for HEA 200

The HEA 200 is a structural steel cross-section utilized in commercial construction, industrial framing, and mechanical engineering. Manufactured as a hot rolled section, it complies with EN 10365 dimensional standards, ensuring predictability in detailing and fabrication.Access to its exact geometric and statical properties is essential for 3D modeling and structural verification.

Geometry: This open profile features a total depth (h) of 190 mm and a flange width (b) of 200 mm, supported by a 6.5 mm thick web and 10 mm thick flanges. With a cross-sectional area of 5380 mm² and a linear mass of 42.3 kg/m, the HEA 200 offers a distinct stiffness-to-weight ratio for both column (axial) and beam applications.

Section properties: For design of bending, the major and minor axis properties dictate the member's structural capacity. The strong-axis moment of inertia (Iy) of 36920000 mm⁴ governs major deflection and serviceability limits. To calculate the ultimate bending resistance, engineers may utilize the strong-axis plastic section modulus of 429400 mm³. For lateral stability and column buckling verifications, the weak-axis moment of inertia (Iz) provides 13350000 mm⁴ of lateral stiffness.

Advanced analysis: For complex load cases, the HEA 200 provides a y-axis shear area (at strong bending axis) of 4000 mm² for web shear verification and a torsion constant of 210400 mm⁴ for calculating rotational twist under eccentric loading. Additionally, a warping constant of 108000000000 mm⁶ is available for rigorous lateral-torsional buckling (LTB) checks.

Monthly Eurocode engineering digest

Stay ahead of Eurocode 3 & structural design updates

Get practical Eurocode verification guides, new calculator releases (like automated HEA 200 checks), and National Annex insights delivered once a month. Zero spam.

1 email per month. Unsubscribe in 1 click at any time.