HD 260x225

Production class: hot rolled (EN 10365)

Section geometry

HD shape
Height (h):
309mm
Width (b):
271mm
Web thickness (tw):
24mm
Flange thickness (tf):
42mm
Radius (r):
24mm

Section properties

Moment of inertia (I):mm⁴
Y-axis:
4.375E8
Z-axis:
1.397E8
Elastic section modulus (Wel):mm³
Y-axis:
2.831E6
Z-axis:
1.031E6
Plastic section modulus (Wpl):mm³
Y-axis:
3.395E6
Z-axis:
1.583E6
Radius of gyration (i):mm
Y-axis:
123
Z-axis:
69
Plastic shear area (Av):mm²
Y-axis:
22764
Z-axis:
8918

Weight per meter:
225kg/m
Area (A):
28660mm²
Surface area per meter:
1.613m²/m
Torsion constant (It):
1.533E7mm⁴
Warping constant (Iw):
2.482E12mm⁶

Verify HD 260x225 in Eurocode 3 calculators

Pre-load this cross-section directly into a structural analysis or individual capacity check.

Member design & optimization

Simple supported beam with permanent & variable load

Configure span length and manual point (F at midspan) or distributed (q from 0 to L) loads.

mm
kN/m
kN/m

Profile overview for HD 260x225

The HD 260x225 is a structural steel cross-section utilized in commercial construction, industrial framing, and mechanical engineering. Manufactured as a hot rolled section, it complies with EN 10365 dimensional standards, ensuring predictability in detailing and fabrication.Access to its exact geometric and statical properties is essential for 3D modeling and structural verification.

Geometry: This open profile features a total depth (h) of 309 mm and a flange width (b) of 271 mm, supported by a 24 mm thick web and 42 mm thick flanges. With a cross-sectional area of 28660 mm² and a linear mass of 225 kg/m, the HD 260x225 offers a distinct stiffness-to-weight ratio for both column (axial) and beam applications.

Section properties: For design of bending, the major and minor axis properties dictate the member's structural capacity. The strong-axis moment of inertia (Iy) of 437500000 mm⁴ governs major deflection and serviceability limits. To calculate the ultimate bending resistance, engineers may utilize the strong-axis plastic section modulus of 3395000 mm³. For lateral stability and column buckling verifications, the weak-axis moment of inertia (Iz) provides 139700000 mm⁴ of lateral stiffness.

Advanced analysis: For complex load cases, the HD 260x225 provides a y-axis shear area (at strong bending axis) of 22764 mm² for web shear verification and a torsion constant of 15330000 mm⁴ for calculating rotational twist under eccentric loading. Additionally, a warping constant of 2482000000000 mm⁶ is available for rigorous lateral-torsional buckling (LTB) checks.

Monthly Eurocode engineering digest

Stay ahead of Eurocode 3 & structural design updates

Get practical Eurocode verification guides, new calculator releases (like automated HD 260x225 checks), and National Annex insights delivered once a month. Zero spam.

1 email per month. Unsubscribe in 1 click at any time.