SHS 250/10
Production class: cold formed (EN 10219-2)
Section geometry
Section properties
Verify SHS 250/10 in Eurocode 3 calculators
Pre-load this cross-section directly into a structural analysis or individual capacity check.
Simple supported beam with permanent & variable load
Configure span length and manual point (F at midspan) or distributed (q from 0 to L) loads.
Quick capacity verifications
Buckling capacity check
Flexural, torsional & torsional-flexural buckling (EN 1993-1-1)
Moment capacity check
Uniaxial & biaxial bending moment resistance (EN 1993-1-1)
Shear capacity check
Plastic & elastic shear force verification (EN 1993-1-1)
Axial capacity check
Tension & compression cross-section resistance (EN 1993-1-1)
Profile overview for SHS 250/10
The SHS 250/10 is a structural steel cross-section utilized in commercial construction, industrial framing, and mechanical engineering. Manufactured as a cold formed section, it complies with EN 10219-2 dimensional standards, ensuring predictability in detailing and fabrication.Access to its exact geometric and statical properties is essential for 3D modeling and structural verification.
Geometry: This rectangular/square hollow section is defined by a depth of 250 mm, a width of 250 mm, and a uniform wall thickness of 10 mm. With a cross-sectional area of 9256.637061 mm² and a linear mass of 72.66460093 kg/m, the SHS 250/10 offers a distinct stiffness-to-weight ratio for both column (axial) and beam applications.
Section properties: For design of bending, the major and minor axis properties dictate the member's structural capacity. The strong-axis moment of inertia (Iy) of 87070000 mm⁴ governs major deflection and serviceability limits. To calculate the ultimate bending resistance, engineers may utilize the strong-axis plastic section modulus of 822000 mm³. For lateral stability and column buckling verifications, the weak-axis moment of inertia (Iz) provides 87070000 mm⁴ of lateral stiffness.
Advanced analysis: For complex load cases, the SHS 250/10 provides a y-axis shear area (at strong bending axis) of 4628.318531 mm² for web shear verification and a torsion constant of 142000000 mm⁴ for calculating rotational twist under eccentric loading.
Stay ahead of Eurocode 3 & structural design updates
Get practical Eurocode verification guides, new calculator releases (like automated SHS 250/10 checks), and National Annex insights delivered once a month. Zero spam.