RHS 80x40/2
Production class: cold formed (EN 10219-2)
Section geometry
Section properties
Verify RHS 80x40/2 in Eurocode 3 calculators
Pre-load this cross-section directly into a structural analysis or individual capacity check.
Simple supported beam with permanent & variable load
Configure span length and manual point (F at midspan) or distributed (q from 0 to L) loads.
Quick capacity verifications
Buckling capacity check
Flexural, torsional & torsional-flexural buckling (EN 1993-1-1)
Moment capacity check
Uniaxial & biaxial bending moment resistance (EN 1993-1-1)
Shear capacity check
Plastic & elastic shear force verification (EN 1993-1-1)
Axial capacity check
Tension & compression cross-section resistance (EN 1993-1-1)
Profile overview for RHS 80x40/2
The RHS 80x40/2 is a structural steel cross-section utilized in commercial construction, industrial framing, and mechanical engineering. Manufactured as a cold formed section, it complies with EN 10219-2 dimensional standards, ensuring predictability in detailing and fabrication.Access to its exact geometric and statical properties is essential for 3D modeling and structural verification.
Geometry: This rectangular/square hollow section is defined by a depth of 80 mm, a width of 40 mm, and a uniform wall thickness of 2 mm. With a cross-sectional area of 453.6991118 mm² and a linear mass of 3.561538028 kg/m, the RHS 80x40/2 offers a distinct stiffness-to-weight ratio for both column (axial) and beam applications.
Section properties: For design of bending, the major and minor axis properties dictate the member's structural capacity. The strong-axis moment of inertia (Iy) of 373600 mm⁴ governs major deflection and serviceability limits. To calculate the ultimate bending resistance, engineers may utilize the strong-axis plastic section modulus of 11610 mm³. For lateral stability and column buckling verifications, the weak-axis moment of inertia (Iz) provides 127200 mm⁴ of lateral stiffness.
Advanced analysis: For complex load cases, the RHS 80x40/2 provides a y-axis shear area (at strong bending axis) of 151.2330373 mm² for web shear verification and a torsion constant of 308800 mm⁴ for calculating rotational twist under eccentric loading.
Stay ahead of Eurocode 3 & structural design updates
Get practical Eurocode verification guides, new calculator releases (like automated RHS 80x40/2 checks), and National Annex insights delivered once a month. Zero spam.